NOC:Rheology and Processing of Paints, Plastic and Elastomer Based Composites

Lecture 1 - Basic Introduction to Polymer

Lecture 2 - Structure Process Correlation

Lecture 3 - Basic Rheology

Lecture 4 - Classification of Fluids

Lecture 5 - Flow of Liquids Through Various Channels - 1

Lecture 6 - Flow of Liquids Through Various Channels - 2

Lecture 7 - Flow of Liquids Through Various Channels - 3

Lecture 8 - Introduction to Viscometers and Rheometers

Lecture 9 - Ostwald Viscometer, Brookfield Viscometer, Falling Piston Viscometers

Lecture 10 - ODR, MDR, RPA, PPR

Lecture 11 - DMA -In-Light of rheology

Lecture 12 - Master Curve and its Implications

Lecture 13 - Capillary Rheometer

Lecture 14 - Introduction to Paints and importance of rheology in paints

Lecture 15 - Rheology of paints - 1

Lecture 16 - Rheology of paints - 2

Lecture 17 - Rheology of Adhesives and Sealants

Lecture 18 - Rheology of Fiber and Plastics

Lecture 19 - Practical demonstration on Brookfield viscometer and Oswald viscometer

Lecture 20 - Practical demonstration on Mooney viscometer, ODR and MDR

Lecture 21 - Practical demonstration on RPA

Lecture 22 - Practical demonstration on PPR and DMA

Lecture 23 - Practical demonstration on Capillary Rheometer

Lecture 24 - Numeriacal Problems related to basic rhelogy

Lecture 25 - Importance of compounding and introduction to various compounding ingredients

Lecture 26 - Properties and role of various compounding ingredients

Lecture 27 - Surface treatment of reinforcing elements

Lecture 28 - Rhelogy of Elastomers

Lecture 29 - Importance of die swell (correlating with normal force differences)

Lecture 30 - Melt Fracture and other ectrudate instabilities

Lecture 31 - Introduction to plastic and rubber mixing and blending

Lecture 32 - Various mixing equipment and their importance

Lecture 33 - Introduction to Two-Roll Mill and Mixing on Two - Roll Mill 1

Lecture 34 - Introduction to Two-Roll Mill and Mixing on Two - Roll Mill 2

Lecture 35 - Introduction to Internel mixture Kneaders and Mixing using Internel mixture and Kneaders

Lecture 36 - Practical demonstration of Rubber mixing on a two roll and using an internal mixer

Lecture 37 - Molding Techniques

Lecture 38 - Calendering

Lecture 39 - Extrusion

Lecture 40 - Rheology of Injection moulding process

Lecture 41 - Plastic and fiber-related processing

Lecture 42 - Numerical problems related to various processing techniques

Lecture 43 - Wire coating, Garvey die, Profile Extrusion

Lecture 44 - Introduction to FEA based computationalfluid mechanics on extrusion - 1

Lecture 45 - Introduction to FEA based computationalfluid mechanics on extrusion - 2

Lecture 46 - Introduction to FEA based computationalfluid mechanics on extrusion - 3

Lecture 47 - Practical demonstartion on FEA

Lecture 48 - Concluding remarks and commentson applied rheology for advanced learners